Assessment of some baryte ores from Northern Cross-River, Nigeria, for oilfield drilling fluid supplement
DOI:
https://doi.org/10.15243/jdmlm.2021.091.3015Keywords:
API standard requirement, baryte, Benue Trough, oil fields drilling fluid, quality evaluationAbstract
There is a very high demand for the American Petroleum Institute (API) grade baryte in Nigeria due to the continuous massive drilling in oil and gas fields. Considering the presumption that local baryte is of low quality, processed baryte is imported, leading to great national revenue losses. Some baryte deposits in the Northern Cross River, Nigeria were sampled and studied in field and laboratories, based on API standard requirements (2004 and 2010), to ascertain their suitability for use as weighting additive in drilling fluids. Furthermore, flame testing of the samples yielded yellowish-green flame indicating barium presence; X-ray diffraction (XRD) and X-Ray fluorescence (XRF) analyses confirmed the mineralogy and chemical composition of the samples, respectively. The results revealed the Specific Gravity, SG range of 4.37 to 4.52; concentration of alkali earth metals as calcium 8.40mg/kg to 62.10mg/Kg; the residue >75micron and particle sizes <6microns processed had normal range, respectively below 3% and 30%; and the samples’ BaSO4 %weightcomposition was over 90%. The chemical analysis indicated no significant undesired minerals. Galena gangue with baryte was observed in three locations though these could be easily beneficiated through physical separation.  The tests and analyses result qualified the Northern Cross River baryte samples as high-grade API standard baryte, suitable for oilfield drilling fluid. Further estimation of the baryte reserves in this region was highly recommended, as this might proffer a substantial solution to the sustainable supply of excellent local quality drilling baryte in Nigerian oilfields.References
Adedeji, A.N., Sidique, S.F., Rahman, A.A. and Law, S.H. 2018. Mediating effects of indigenous oil firms’ participation and backward linkages on the relationship between local content policy and job creation: Insight from Nigeria. Cogent Business & Management 5(1): 1-21, doi: 10.1080/23311975.2018.1515576.
Al-Awad, M.N. and Al-Qasabi, A.O. 2000. Characterisation and testing of Saudi Barite for potential use in drilling operations. Journal of King Saud University 13(2): 287-299.
API Spec 13A. 2004. Drilling Fluids Materials – Specifications and Tests, 16th Edition. American Petroleum Institute, Washington DC., USA, 124p.
API Spec 13A. 2010. Specification for Drilling Fluid Materials, 18th Edition. American Petroleum Institute, Washington DC., U.S.A., 13-23p, 83-96p.
Ariffin, K.S. 2004. Barite (Barium). EBS 425 – Mineral Perindustrian. School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, Penang, Malaysia. 1-9p.
Benkhelil, J. 1982. The Benue trough and the Benue chain. Geology Magazine 119(2): 155-168.
Betekhtin, A., Agol, V. and Gurevich, A. 1964. A Course of Mineralogy, 1st Edition. Peace Publishers, Moscow, Russia. 368-372p.
Bogue, R.G. 1951. Baryte prospect near Gabu, Ogoja Province. Geological Survey of Nigeria Report No. 1014 (unpublished).
Bonel, K.A. 2005. Barytes. British Geological Survey, Natural Environment Research Council, Keyworth, Nottingham, U.K. 1-28p.
Bosch, C. 2016. Oilfield mineral consumption trends. Proceedings of the Oilfield Minerals & Markets Forum. 5-7 June 2016. Houston, Texas, USA 1-12p.
Chevron Nigeria Ltd. 2018. 2017 Corporate Responsibility Report. Chevron Nigeria Ltd, Lekki Peninsula, Lagos, Nigeria. 44-45p.
Christidis, G.E. 2011. Industrial minerals: Significance and important characteristics. In: Christidis, G.E. (ed), European Mineralogical Union Notes in Mineralogy, 9: Advances in the Characterisation of Industrial Minerals. European Mineralogical Union, Mineralogical Society of Great Britain & Ireland, London, pp. 1-24.
Cratchley, J.D. and Jones G.P. 1965. An interpretation of the geology and gravity anomalies of the Benue Valley, Nigeria. Overseas Geology Survey, Geophysical 1(26): 1-27.
Darley, H. and Gray, G. 1988. Drilling Fluid Components. In: Darely, H. and Gray, G., Composition and Properties of Drilling and Completion Fluids. 5th ed. Gulf Professional Publishing, Houston, USA. pp. 545-617.
Duru, U.I., Kerunwa, A., Omeokwe, I., Uwaezuoke, N. and Obah, B. 2019. Suitability of some Nigerian barites in drilling fluid formulations. Petroleum Science and Engineering 3(2): 46-59.
Ene, E.G., Okogbue, C.O. and Dim, C.P. 2012. Structural styles and economic potential of some baryte deposits in the Southern Benue trough, Nigeria. Romanian Journal of Earth Sciences 86(1): 27-40.
Energy Mix Report. 2019. IOCs push for in country Barite exploration to reduce N5bn annual capital flight. Accessed September 30, 2020. https://www.energymixreport.com/iocs-push-for-in-country-barite-exploration-to-reduce-n5bn-annual-capital-flight/
Farrington, J.A. 1952. A preliminary description of the Nigerian Lead-Zinc field. Economic Geology 47(6):47, 583-608.
Foraminifera Market Research. 2016. Barite Ore trading in Nigeria; How viable? Accessed September 30, 2020. https://foramfera.com/2016/03/04/barite-ore-trading-in-nigeria-how-viable/
Guiraud, M. 1993. Late Jurassic-early cretaceous rifting and late cretaceous transgression inversion in the upper Benue Basin, NE, Nigeria. Bulletin des Centres de Recherches Exploration-Production Elf Aquitaine 17(2): 371-383.
Hanor, J. 2000. Barite-celestine geochemistry and environments of formation. Reviews in Mineralogy. Mineralogical Society of America 40(1): 193–275.
Johnson, C.J., Piatak, N.M. and Miller, M.M. 2017. Barite (Barium). In: Schulz, K.J., DeYoung, Jr., J.H., Seal II, R.R. and Bradley, C.C. (eds.), Critical Mineral Resources of the United States—Economic and Environmental Geology and Prospects for Future Supply (Professional Paper 1802–D). US Geological Survey, Reston, Virginia, USA. pp. 1-30.
Kadiri, F. 2020. Barite: Industrial minerals road-map will address import-dependency, job losses - Minister. The Truth. Accessed September 30, 2020. https://www.truthng.com/barite-industrial-minerals-road-map-will-address-import-dependency-job-losses-adegbite.html
King, H.M. 2013. Barite mineral uses and properties. Geology Website, pp 1-4. Accessed September 30, 2020. https://geology.com/minerals/barite.shtml
Labe, N.A., Ogunleye, P.O., Ibrahim, A.A., Fajulugbe, T. and Gbadema, S.T. 2018. Review of the occurrence and structural controls of Baryte resources of Nigeria. Journal of Degraded and Mining Lands Management 5(3): 1207-1216, doi: 10.15243/jdmlm. 2018.053.1207.
McRae, M.E. 2016. Barite (Advanced Release), in metals and minerals, Minerals Year Book, 1st Edition. US Geological Survey, Reston, Virginia, U.S.A. 9.1-9.10p.
McRae, M.E. 2020. Barite Data Sheet. In: US Geological Survey, Mineral Commoditive Summary 2020. US Geological Survey, Reston, Virginia, USA. pp. 28-29.
Mineral Galleries. 2001. The mineral, Barite. Amethyst Galleries. Accessed September 30, 2020. www.ingalleries.com/barite
Ministry of Mines and Steel Development. 2008. Barytes: Exploration Opportunities in Nigeria. Abuja, 1-7.
O’Driscoll, M.O. 2017. Barite miners in Nigeria receive a government boost; Call for import ban to be reinstated. Proceedings from the Industrial Mineral Forums and Research. 21-23 May 2017. The Houstonian Hotel, Houston, Texas, USA p 1-10.
Obi, D., Ekwueme, B.N. and Akpeke, G.B. 2019. Reserve estimation of barite deposits using geological and geophysical investigations in Cross River State South Eastern, Nigeria. Journal of Environment and Earth Science 4(10): 16-31.
Oden, M.I. 2012. Barite Veins in the Benue trough: field characteristics, the quality issue and some tectonic implication. Environment and Natural Resources Research 2(2): 21-31, doi:10.5539/enrr.v2n2p21.
Ogundipe, I.E. 2017. Thermal and chemical variations of the Nigerian Benue trough lead-zinc barite-fluorite deposits. Journal of African Earth Sciences 132: 72-79, doi: 10.1016/j.jafrearsci.2017.05.004.
Ovadia, J.S. 2013. The Nigerian “One Percent†and the management of national oil wealth through Nigerian content. Science & Society 77(3): 315-341.
Pulidindi, K. and Pande, H. 2017. Barite market analysis report - Global Industry Forecast. Global Market Insight, 172p.
Shearn, H.C. 2010. The suitability of Barite from East Coast of Peninsular Malaysia as weighting agent in drilling fluid. B.Eng. (Hons) dissertation, Universiti Teknologi Petronas, Perak, Malaysia.
Downloads
Submitted
Accepted
Published
How to Cite
Issue
Section
License
Submission of a manuscript implies: that the work described has not been published before (except in the form of an abstract or as part of a published lecture, or thesis) that it is not under consideration for publication elsewhere; that if and when the manuscript is accepted for publication, the authors agree to automatic transfer of the copyright to the publisher. 
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Scientific Journal by Eko Handayanto is licensed under a Creative Commons Attribution 4.0 International License.
Based on a work at https://ub.ac.id.
Permissions beyond the scope of this license may be available at https://ircmedmind.ub.ac.id/.
This work is licensed under a 